The Vinyl Lady
Queen Creek, AZ 85243
ph: 480-240-0531
fax: 480-890-0740
Jill@thevinyllady.com

Application:
Your vinyl transfers will come with transfer tape already applied to the front of the
letters. The transfer tape, which is sticky and transparent, allows you to lift the vinyl
letters off of their backing and transfer them to your wall. To be sure that all letters
and punctuation is properly lifted by the transfer tape, you will need to rub the
transfer tape over each character with a flexible plastic card (something similar to a
credit card).

The easiest way to ensure that your quotes are straight on your wall is to use a ruler
to make a guideline and then line up your lettering and tape the top edge of it along
the guide line (you will tape the lettering to the wall just as it was sent to you with the
backing and transfer tape intact). The tape itself acts as a hinge so that you can flip
the lettering up and peel away the backing.

Once the backing has been peeled away let the lettering fall back in to position. Rub
the lettering again with the flexible plastic object so that the adhesive on the back of
the letters themselves stick to the wall. Peel the transfer tape off of the letters and
admire your finished product!

Removal:
If you ever need to remove your vinyl wall lettering all you need is a hair dryer. The
letters should peel off easily when the heat of the dryer is applied to them.

Before you attempt to apply a large set of lettering to a wall, read instructions carefully. Make sure
to firmly and gently rub the top of your transfer tape.  This helps the letters stick easier to the
transfer tape.

****We cannot be held responsible for mistakes made while applying the lettering.  We provide a
high quality product, and guarantee the look and design of our lettering.  If these application
instructions are not read or followed, you could possibly have problems applying the vinyl.  It's an
easy process, and will work beautifully if you make sure to follow the directions.****